You Need Help?
Recommended All Over Houston, TX

Get WhatsApp Support

Garage Door Operator Install Costs Cypress TX

Garage Door Operator Install Costs Cypress TX

Garage Door Operator Install Costs Cypress TX

Garage Door Cypress TX


A garage door opener install costs between $218 and $520. For this project, expect to pay $150 to $500 for parts plus $65 to $85 per hour for labor.

The final price largely depends on the brand, model, and horsepower rating of the selected system.

On This Page:

Garage Door Operator Install Costs

    New Garage Door Opener Installation Cost

    Cost to Replace Garage Door Opener

    Automatic Garage Door Opener Prices by Type

    Chain-Driven Operators

    Belt-Driven Operators

    Screw-Driven Operators

    Commercial Garage Door Opener Price

    Automatic Overhead Door Motor Cost by Brand

    Cost to Replace Garage Door Remote & Lighting

    DIY vs. Hire a Garage Door Motor Pro


    New Garage Door Opener Cost

    Expect to pay between $220 and $520, or up to $825 to have a new garage door operator installed.

    Depending on your selected model, the system will cost $150 to $500.

    You may also need $50 to $75 in extra parts and equipment rentals.

    The remainder is the labor rate of $65 to $85 per hour for two to six hours.

    The extra time allows for precise placement of the brackets and system components.

    Cost to Replace Garage Door Opener

    Most pros include the removal of your old garage door opener at an average cost of $510.

    As with a new install, the system will still run $150 to $500, depending on the brand, model, and horsepower rating.


    Automatic Garage Door Opener Prices by Type



    Chain-Driven$150 – $250

    Belt-Driven$160 – $450

    Screw-Driven$200 – $500

    Commercial$300 – $1,500

    When choosing a garage door opener, you must select between chain, belt, and screw-driven models. Weigh the following factors and price points to see which one might work best for your needs.

    Chain-Driven Operators

    Chain-driven operators cost $150 to $250 due to their basic design.

    They use a metal chain to push and pull the garage door along the tracks as needed to raise and lower it.

    Since they were the first automatic openers to hit the market, their design is somewhat outdated. They are also much louder than the other models as they work to move the door on demand.

    Belt-Driven Operators

    If you choose belt-driven operators, you will pay anywhere from $160 to $450.

    As the modern solution to noisy chain-driven models, they are a popular choice for homeowners everywhere.

    They use a strong belt to move the door up and down without fanfare.

    The tradeoff is that they are more expensive to buy and maintain.

    Screw-Driven Operators

    Screw-driven operators are $200 to $500 due to their decline in popularity.

    Although these models once were the leading solution to noisy chains, belt-driven models put many of them out of service.

    Since they use plastic parts at key junctions, they have high maintenance needs as well. In recent years, many manufacturers stopped creating this type of opener.

    Commercial Garage Door Opener Prices

    At $300 to $1,500, commercial garage door operators are much more expensive than residential models.

    Manual lift models are at the lower end of the spectrum, while automatic systems have higher price points.

    These auto models are pricier due to the additional horsepower and chain strength needed to lift huge overhead commercial doors.

    If you are unsure which to use, you can ask a trusted local garage door opener installation expert.

    Automatic Overhead Door Motor Cost by Brand


    Cost to Replace Garage Door Opener Remote and Lighting

    If the garage door keypad needs replacement, it will run between $30 to $60. New remotes are similarly priced at $30 to $40 each. The lighting system, however, is closer to $50 to $100 for operators that do not come with one installed. If just the bulb needs replacement, it only costs around $10. Here’s a tip: Replace all incandescent bulbs with high-lumens LED bulbs. You’ll recover the cost of the LED bulbs very quickly.

    Although many systems come with all these components, not all do. If not, they are available as add-ons to improve the function and convenience of the operator. Most add-ons are plug-and-play, allowing for quick setup on your own or by a garage door opener company near you. When installing lighting on a new system, an electrician may need to come through to run the wiring.

    DIY vs. Hire a Garage Door Motor Pro

    Homeowners should avoid the DIY route on this one. Instead, consult a garage door expert before starting any installations or repairs themselves. Homeowners can hire a garage door motor pro to do the job safely and effectively. Be sure to ask your expert to install reverse sensors with the system. These sensors detect obstructions and reverse the door’s movement to prevent injuries.


    How much does it cost for a new garage door?

    A new single garage door costs between $300 and $1,100. Double door models start at $800 and go all the way up to $2,000.

     Installation costs increase the total from $600 to $2,500.

    How long do garage door openers last?

    With normal usage, garage door openers last 10 to 15 years. If the model does not have enough horsepower to open and close the door with ease, it may not last nearly that long. For best results, match the operator to the door size and always use it as directed. A new garage door opener typically costs between $220 and $520.

    What is the average cost of an automatic garage door?

    The average cost of an automatic garage door is $700 single garage door. The average cost for a double door model is $1,400 for the door alone, with installation costs bringing the average up to $1,550.

    How much does a garage door remote cost?

    A new garage door remote typically costs between $30 to $40 each.


    Related Posts